OEM China 3d Printer Cape Town - Print material-high tenacity resin-9006 – Digital Manufacturing

Short Description:

Product Detail

Product Tags

Feedback (2)

It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for Brother Printer Scanner, Best Industrial Printers, 3d Laser Scanner Price List, We welcome new and outdated shoppers from all walks of lifetime to call us for long term company associations and mutual accomplishment!

OEM China 3d Printer Cape Town - Print material-high tenacity resin-9006 – Digital Manufacturing Detail:

3D Printing Materials

Resin-9006

Introduction of 3D Printing Materials

Characteristics

SZUV-S9006 ???

PRODUCT DESCRIPTION?

SZUV-S9006?is an ABS like SL resin which has high-toughness?features. It is designed for solid state SLA platforms.?SZUV-S9006?can be applied in master patterns, concept models, assembly parts and functional prototypes in the?field of automotive, medical and consumer electronics industries.The parts duability building with SZUV-S9006?is over 6.5months.SZUV-S9006?

TYPICAL FEATURES

-Liquid resin`s medium viscosity, so easy recoating, easy clean parts and machines?

-Improved strength retained, improved dimensions retention of parts in humid condition?

-need minimal part finishing

-Long shelf life in machine

-Low bottom contraction?

TYPICAL BENEFITS

-Need less part finishing time,easier post-curing?

-Buliding accurate and high tough parts with an improved dimensional stability?

-High quality controls for vacuum casting parts

-Low shrink and good resistance to yellowing?

-Magnificent white color?

-Outstanding machinable SLA material?

High-toughness?

?Physical Properties – Liquid Material?

Appearance	White
Density?	1.11-~1.15g/cm³?@ 25 ℃
Viscosity ?	230~290cps @ 26?℃
Dp?	0.13~0.145?mm
Ec?	9.5~10.5?mJ/cm²
Building layer thickness	0.05~0.12mm

?

Mechanical Properties of Post-Cured Material?

MEASUREMENT	TEST METHOD?	VALUE?
?	?	90-minute UV post-cure?
Hardness, Shore D	ASTM D 2240	75~85
Flexural modulus, Mpa	ASTM D 790	2,592-2,675??
Flexural strength, Mpa	ASTM D 790	63- 70
Tensile modulus, MPa	ASTM D 638	2,489-2,595
Tensile strength, MPa	ASTM D?638	36-53
Elongation at break	ASTM D 638	15?-25%
Poisson`s Ratio	ASTM D 638	0.4-0.44
Impact strength notched Izod, J/m	ASTM D 256	45?- 70
Heat deflection temperature, ℃	ASTM D 648 @66PSI?	38~50?
Glass transition,Tg	DMA，E”peak	40~54
Coefficient of thermal expension	TMA(T<Tg)	90~102*E-6
Density, g/cm³	?	1.12~1.18?
Dielectric Constant60 Hz	ASTM D 150-98?	4.2~5.0?
Dielectric Constant?1 kHz	ASTM D 150-98?	3.3~4.2?
Dielectric Constant1 MHz	ASTM D 150-98?	3.2~4.0?
Dielectric?StrengthkV/mm	ASTM D 1549-97a?	12.8~16.1?

?Note: the temperature of szuv-s9006 should not be too high. Please use it below 25c.The relative humidity for use and storage must be under 38RH%.

Fire Fighting Measures

（1）extinguishant

Dry powder fire extinguishing agent, alcohol resistant foam extinguishing agent, carbon dioxide, dry sand, spray water.

（2）Special risk

Fires may produce irritation and harmful gas

（3）The firemen of protective measures

Fireman should wear protective appliances (eye protection, protective clothing, mailing gas with gas mask, etc.), put out the fire in the windward.

6.Accidental Release Measures

（1）Homework personnel protective equipment

Ensure adequate ventilation, wear suitable protective clothing, make a good job in hand and eye/face protection.

（2）Environmental protection measures

Prevent products from entering the drain or open water

（3）Cleaning method

For a small amount of leakage, use dry sand, soil and towels absorb the residual liquid, recycling and airtight container.

For a large number of leakage, leakage of liquid can be in front of the embankment, the introduction of recycle to safe place.

（4）Secondary hazard prevention measures

Quickly remove all fire spark (ban on smoking in nearby, and the ignition).

7.Handling And Storage

（1）Operation treatment technical measures

Avoid contact with eyes, skin and clothing. Don’t inhaling mist or steam, don’t accidentally swallow, keep container tightly closed after the thorough cleaning.

（2）Partial or full ventilation

Maintain adequate ventilation

（3）Safe handling matters needing attention

No?smoke, no fire

（4）Safe storage conditions

Stored in a cool, well ventilated place, away from heat, sparks and flames. Keep container tightly closed until it is put into use.

（5）packaging container and material

In the process of custody, please do not transfer to other containers. Don’t fall back to the original containers of products that will be used.

Cases

SOME OF MY PROJECTS

btn12
btn7
汽車配件
包裝設計
藝術設計
醫療領域

Education

Hand Molds

Auto Parts

Packaging Design

Art Design

Medical

Product detail pictures:

Related Product Guide:
SABIC introduces breakaway support material for 3D printed PEI | Most Expensive 3d Printer
FARO? Announces Optor? Series 3D Scanners for Digital Dentistry | Most Expensive 3d Printer

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for OEM China 3d Printer Cape Town - Print material-high tenacity resin-9006 – Digital Manufacturing , The product will supply to all over the world, such as: Melbourne, Colombia, Dubai, Our experience makes us important in our customer eyes. Our quality speaks itself the properties like it do not tangle, shed or breakdown, so that are our customers will always be confident while placing an order.

3d Printers Suppliers In Cape Town